Home
Products
Documentation
Contact Us
Products 
The ideal system for many different industries like window
and door components, mouldings and furniture. It is highly
productive (more than 180 lugs per minute) and can handle soft
or hard wood. Automatic lug feeder and automatic corner transfer
for production up to 12 press cycles per minute.
More 
Specially designed for short blocks to produce studs from 2 x 3 (50 mm X 75 mm)
to 2 x 8 (50 mm X 200 mm), speed up to 180 lugs per minute, 32 foot (9.75 m) press
for production up to 325 linear feet (100 m) per minute.
More
Designed for short blocks to produce studs from 2 x 3 (50 mm x 75mm)
to 2 x 8 (50 mm x 200 mm), speed up to 180 lugs per minute with in line
continuous press (crowder) and flying saw, for production over 425 linear
feet (130 m) per minute.
More
A highly productive system designed for stud or I beam flange production.
Long blocks at infeed, from 8 in (203 mm) to 84 in (2 m), with in line
continuous press (crowder), flying cut off saw for production over
425 linear feet (130 m) per minute.
More
Custom built system for specific applications, for customers who need to
process very long material at infeed, with stop and go press.
More
Ideal for I beam flanges or gluelam beams production. Infeed capacity from
12 in (300 mm) to 12 ft (3.6 m) and up to 180 lugs per minute. In line continuous
press (crowder) and flying cut off saw for production up to 600 linear feet (183 m) per minute.
More
This heavy duty AUTOMATIC CROSSCUT SAW was engineered with the same
regard for high quality, high performance and durability as our renowned
finger jointing systems. Coupled with a marking station or a scanner, this
Crosscut Saw will quickly and efficiently eliminate all the identified defects
of your lumber.
More
MSR Grading is made easily affordable with the CRP 360 MSR GRADING MACHINE,
which is certified by the CLSAB (Canadian Lumber Standards Accreditation Board)
and the ALSC (American Lumber Standard Committee). It is a high speed continuous
flow production line machine that grades MSR dimensional lumber.
More
The CRP 180 SHORT BLOCK FEEDER, is a perfect complement to the CRP 2000 finger
jointing system. Eliminate bottlenecks at your infeed and fill 100% of your lugs.
Centrifugal force aligns all the blocks in a transferring conveyor which are then
fed individually, through an indexing mechanism, directly on the finger jointer's
feeder belt or chain.
More
Add the CRP WANE-UP SYSTEM to your stud line for planing and re-ripping optimization.
The wane is measured and controlled by a JRT scanner.
More
MSR Grading is made easily affordable with the CRP 360 MSR GRADING MACHINE, which is
certified by the CLSAB (Canadian Lumber Standards Accreditation Board) and the
ALSC (American Lumber Standard Committee). It is a high speed continuous flow production
line machine that grades MSR dimensional lumber.
More
Our system is PLC controlled, which gives a precise glue deposit with almost no waste.
It is entirely made of stainless steel which makes the clean up easier. We can adapt
this system to any existing machine.
More
Conduct your own finger jointed lumber testing with our laboratory equipment. The BT2K
BENDING PROOF LOADER tests the ultimate tensile strength (UTS) of the specimen.
The DELAMINATION UNIT and the OVEN will test the resistance to delamination by
increasing the humidity level and then dry the blocks. Our testing equipment will
help you determining conformance to the specified requirements of various
grading standards.
More
The SSM 200 SHINGLE SQUARING MACHINE will add value to your wood shingle production.
High speed processing and perfectly squared shingles all the time.
More